Barco LX-5 SERIES Uživatelská příručka

PROJECTORLX-5USER GUIDE(lens is optional)Getting StartedConnection and InstallationNetwork SettingsOperation and SettingsFor Customer use :Enter belo

10Getting StartedFront/Right SideA Air Inlet/FilterThe air inlets absorb air to cool the interior of the projector. A filter is mounted inside the pro

11RearG [DVI 1 to 4] TerminalThis is an input terminal for video signals. Connect it to the video output terminal of the computer. (A Page 19, 21)HVen

12Connection and InstallationPlease read the following carefully when installing this unit.Optional projection lensMount the optional projection lens

13Projector Installation AngleYou can install this projector between 90.Images will be properly displayed if the horizontal angle is between the ran

14Connection and Installation When shift amount in the right direction is +50 %Install the projector such that the center of the lens is aligned with

15 Overlaying projected images (when zoom lens is in use) Projecting images by stacking projectorsThe lens shift feature enables you to use up to th

16Connection and InstallationScreen Size and Projection DistanceAdjust the distance from the lens to the screen to achieve your desired screen size.

17 LXD (1:1) Short focal length lensNOTE:

18Connection and InstallationConnection During Single-Screen Mode DisplayThe single-screen mode displays signals (up to four signals) from a computer

19 Connection During Single-Screen Mode DisplayBelow is the connection example for four-channel signals from the computer.For two-channel signals fro

2Getting StartedIMPORTANT INFORMATIONAbout the installation placeDo not install the projector in a place that cannot support its weight securely.If th

20Connection and InstallationConnection During Two-Screen/Four-Screen Mode DisplayThe two-screen/four-screen mode enables simultaneous display of sign

21 Connection Example During Two-Screen Mode Connection Example During Four-Screen ModeNOTE:

22Network SettingsConnect this projector, the computer for controlling this projector, and the switching hub using LAN cables, followed by configuring

231 Check to ensure that this projector, computer, and switching hub are properly connected2 Connect the power cord to the power input terminal of thi

24Network SettingsSet the IP address for this projector. There are 2 methods to set the IP address. Assigning a static IP address Assigning an IP ad

25 Setting (Changing) the IP address of this projector1 Launch the Internet Explorer on the computer2 Check if the proxy has been set in the ALAN Set

26Network SettingsAssigning a static IP address (Cont’d)4 Enter Ahttp://192.168.0.2B in the address field of the web browser, and click AGoB● A login

27Assigning IP Address from the DHCP ServerThe IP address is automatically assigned by the DHCP server.1 After connecting, turn on the main power.● Re

28Operation and SettingsIf setting for this projector is not completed, refer to the “Setting Menu” (A Page 30) upon turning on the power and configur

295 Adjust the focusYou can adjust the focus using the AFocusB item of the Lens menu. To move the focus point closer:Press the A+B (Near) end of AFoc

3- The lens for this product is optional. Do not attach the power cord when the lens is not attached. Turning on the power when no lens is attached ma

30Operation and SettingsAfter installation and connection are complete, perform the necessary adjustment and setting.Operate the menus using the compu

31Item Setting Value DescriptionPower ONOFFFor turning the power ON/OFF.ON : Turns on the power.OFF : Turns off the power.NOTE:

32Operation and SettingsImage MenuThis menu is used for adjusting the picture quality. Q denotes the factory default.Setting Menu (Cont’d)BrightnessSe

33Setting MenuThis menu is used for specifying the input level of the terminal and the display mode.Q denotes the factory default.SettingConvergenceLe

34Operation and SettingsConvergence MenuThis menu is used for correcting color shifts in the optical system. Setting Menu (Cont’d)RedSettingConvergenc

35Lens MenuThis menu is used for adjusting the projection lens. ZoomSettingConvergenceLensOptionNetworkMailLogouthost PJ-1user: rootMainImagewTFocus+_

36Operation and SettingsOption MenuThis menu is used for specifying settings for flipping images and screen displays. Q denotes the factory default.Se

37Network MenuFor configuring the network settings. Q denotes the factory default.MainImageSettingConvergenceLensOptionNetworkMailLogouthost PJ-1user:

38Operation and SettingsMail MenuThis menu is for configuring the mail settings, which sends out an error message to the computer of the preset addres

39Q indicates the factory defaultItem Setting Value DescriptionE-Mail Setting For configuring the e-mail feature.E-MailQONOFFON : Use the mail feature

4Getting StartedPOWER CONNECTIONSafety Precautions (Cont’d)The power supply voltage rating of this product is AC110 V to 120 V, AC200 V to 240 V, the

40Operation and SettingsYou can control this projector by connecting the computer to this unit using a RS-232C cross cable (D-sub 9 pins). The command

41 Parameters used for the data formatThe following 2 types of parameters are used for command and response data:(1) ON/OFF (2) Special ParameterEach

42OthersCleaning and Replacing the FilterClean the filter regularly. If the filter is soiled, air intake efficiency may deteriorate, thus resulting in

431 Remove the filter coverThe filter is located at the front and side of the projector unit.2 Remove the sponge and filterHold the center of the filt

44OthersCheck the following points before sending this product for repair.The following phenomena are not malfunctions. If there is no abnormality on

45Symptom Probable Cause Corrective ActionReference PageImage is unusually dark or bright● Is the brightness level properly adjusted?● Adjust accordin

46OthersMessages are displayed when the lamp life has expired and when there is input of signals that cannot be used.What to do when these messages ar

47The lamp time and warning mode are indicated using the indicator.For details on indicator displays during normal operation, refer to the note below.

48OthersThe latest error number appears in the Main Menu when an error occurs in the projector. Error details are as follows:Latest ErrorError Number

49 GeneralPower supply AC 110 V to 120 V, AC 200 V to 240 V 50/60 HzPower consumption 1230 W (Standby mode: 2.7 W)Current consumption Max 10.9 A (AC

5EMC Supplement-This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives.This equipmen

50Others Pin Assignment RS-232C Terminal DVI-D TerminalTMDS = Transition Minimized Differential SignalingDDC = Display Data ChannelSpecifications

51CAUTION:

© 2008 Barco Presentation and SimulationR9011221PROJECTORLX-5_EN.book Page 52 Friday, July 4, 2008 9:35 AM

6Getting StartedGetting StartedSafety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Features . . . . . . . . . . . . . . . .

7Ultra-high resolution, high contrast, and high quality projector Ultra-high resolution of 40962400This projector comes with a newly developed 1.27&

8Getting StartedAccessories Power CordFor the US market (3.3 m x 1)For the EU market (3.3 m x 1) Warranty Card● Other items include the user guides

9Burning-in of D-ILA DeviceoDo not allow the same still picture to be projected for a long time or an abnormally bright video image to be projectedDo