Barco MatrixPRO Manuál s instrukcemi stáhnout pdf (Strana 47)

MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide 37

4. GUI Installation and Operation

GUI Operation

sáÇÉç=pïáíÅÜáåÖ=q~Ä

 Use the following steps to utilize the Video Switching Tab:

1. Click on the Video Switching Tab on the GUI page. A sample tab is shown

below.

Figure 4-5. Video Switching Tab (sample)

2. Select input 1 by clicking once on it. The input "key" turns yellow. Click on the

"key" a second time to de-select it.

3. Select an Output channel (e.g., Output 1). The Output "key" turns white indicating

that a video route has been selected. To the right of the Output "key" in the Video

column, a red box appears in which the Input channel assignment is listed. The

red color indicates that a route is pending. Please note:

~ On the front panel of the MatrixPRO, the Output channel will be steadily

illuminated while the Input key will start blinking. This also is an

indication that a route is pending.

4. Click the Take key on the GUI page. The red box in the Video column turns green

indicating a completed route. The front panel Input key will be steadily

illuminated. Please note:

~ The Video Switching page mimics the MatrixPRO front panel — in that

the user must click on a given input channel "key" in order to see the type

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 89 90

Žádné komentáře

Barco MatrixPRO Manuál s instrukcemi Strana 47