Barco MatrixPRO Manuál s instrukcemi stáhnout pdf (Strana 72)

62 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide

_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä

RS-232 Mode

opJOPO=jçÇÉ

The MatrixPRO will respond with a “#” prompt when the command processor is ready for a

command. The command syntax is shown below

cmd arg1 arg2 … argn<cr>

Please note:

• A space (ASCII 32) must be inserted between the command and any arguments

that follow. A space must also be inserted between all argument parameters,

except for the last argument in the chain.

• All commands in RS-232 mode must be terminated with a carriage return (ASCII

13). The carriage return will tell the command processor to begin execution of the

command.

• Query commands will return the following:

=result

The “=” indicates that a result from a query command is following. The “result” will

follow directly after the “=”. The value of the result will vary depending on the

query command used. A new line will be generated and the prompt (#) will

indicate the system is ready for a new command.

Table B-2. RS-232 Command Syntax

Command Description

cmd cmd is any valid MatrixPRO command, typically 2 to 6 alphabetic

(non numeric) characters

arg argument1, argument2, … argument"N" are required or optional

parameters depending on the command used.

<cr> carriage return (ASCII 13) terminates the command

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 89 90

Žádné komentáře

Barco MatrixPRO Manuál s instrukcemi Strana 72